Latest News:
New 3 port RS 232 / 485 Buffered Hub allows two masters to access one slave ( Protocol Independent ) !
Economical RS-485 to dual port Fiber Optic Converter is now available !
RDC's single to multi-mode Fiber Optic Converter now runs up to 20mbps !
Run full-duplex fiber optic ethernet on a single cable with our RDC EnetFOW

rdc485Enet - RS-485 to Ethernet Device Server (Terminal Server)

- Isolates and convert between Ethernet and RS-485 signals
- Supports automatic negotiation between 10/100 Mbps
- 2 or 4-wire operation (T+, T-, GND or T+, T-, R+, R-, GND) at RS-485 side
- Supports Modbus TCP, Virtual Comm Port and other modes of operation
- Various isolation options available
RS 485 | Baud 230 K | -20C | +65 C
  Signal 1                       Signal 2
Signal Type RS-485C/D/E IEEE 802.3
Signals Isolated Txd, Rxd, Signal Gound Tx Data+, Tx Data-
Rx Data+, Rx Data-
Isolation 2500v galvanic
Speed Up to 230K baud
Distance Typical=15m Max=50m (2500pF per wire) Typical 100m on Cat 5 cable
Connector Removable 5-Screw Terminal 8-Pin RJ45
Operating Temp -20 to +65 DegC (-4 to 150 DegF)
Mounting DIN EN 50 022 or DIN EN 50 035
CE Mark Status Pending
Part Number
Description
Stock
rdc485Enet-dv-3p-cr
RS-485 to Ethernet Converter, DIN-Rail Mount, 9-36v DC Supply, Fully-Isolated Power Supply, 5-screw removable terminal at RS-485 side, RJ45 socket at Ethernet side
Yes
Models:

+
-