Latest News:
New 3 port RS 232 / 485 Buffered Hub allows two masters to access one slave ( Protocol Independent ) !
Economical RS-485 to dual port Fiber Optic Converter is now available !
RDC's single to multi-mode Fiber Optic Converter now runs up to 20mbps !
Run full-duplex fiber optic ethernet on a single cable with our RDC EnetFOW

rdcEnetFO - Ethernet to Fiber Optics Converter

- Isolates and converts between Ethernet 10/100 and optical signals
- Supports automatic negotiation between 10/100 Mbps
- Intrinsic isolation at fiber side
- Transparent operation
- Various optical signal options (Multi-mode, Single-mode, WDM)
Enet | FO MM | Baud 10M | Baud 100M | -40C | +65 C
  Signal 1 Signal 2
Signal Type Ethernet as per IEEE 802.3 Multi-Mode Fiber Optic
Signals Isolated TXDATA+ , TXDATA- , RXDATA+ , RXDATA- Duplex Fiber - TX RX
Isolation 1500v / galvanic Intrinsically Complete Isolation
Speed Auto-negotiatable 10 Mbps, 100 Mbps
Distance Typical=100m on Cat 5 cable Typical=2000m
Connector 8-Pin RJ45 ST
Fiber Size   62.5/125 50/125 100/300µm
Wavelength   1300nm
Operating Temp -40 to +65 DegC (-40 to 150 DegF)
Mounting DIN Rail Mount (3 styles)
CE Mark Status Pending
Part Number
Description
 Stock
rdcEnetFO-gv-2p-st
Multimode Fiber to Ethernet Converter, DIN-Rail Mount, 9 - 48 Vdc Supply, transformer isolation at Ethernet side, ST bayonet connector at fiber side, RJ45 socket at Ethernet side
 Yes
Models:

+
-