Latest News:
New 3 port RS 232 / 485 Buffered Hub allows two masters to access one slave ( Protocol Independent ) !
Economical RS-485 to dual port Fiber Optic Converter is now available !
RDC's single to multi-mode Fiber Optic Converter now runs up to 20mbps !
Run full-duplex fiber optic ethernet on a single cable with our RDC EnetFOW

rdcFoms -DIO - Single - Dual Port Fiber Optics Converter with Digital I - O

- Isolates and converts between Multi-mode, Single-mode and TTL/CMOS signals
- Intrinsic isolation at fiber sides
- Protocol Independent
- 3-wire operation (TTL IN, TTL OUT, TTL GND) on TTL side
- Various modes of operation

FO SM | FO MM | Baud 115K | -20C | +65 C

Signal 1 Signal 2 Signal 3
Signal Type Multi-Mode Fiber Optic Single-Mode Fiber Optic CMOS/TTL Compatible
Signals Isolated Duplex Fiber - TX RX RX TX
Isolation Intrinsically Complete Isolation 2500Vrms Galvanic/Optical
Speed Up to 115200 bps
Distance Typical = 2km Max = 4km Typical = 11km Depends on load
Connector ST (bayonet) 3-way Screw Terminals
Fiber Size 62.5 / 125 50 / 125 100 / 300µm 9 / 125µm --
Wavelength 820 nm 1310nm --
Operating Temp -20 to +65 DegC (-4 to 150 DegF)
Mounting DIN Rail Mount (3 styles)
CE Mark Status Pending

Part Number
Description
 Stock
rdcFoms-DIO-gv-2p-st
Multi-Mode to Single-Mode Fiber Optic Converter, DIN-Rail Mount, 9 - 48 Vdc Supply, MM and SM with ST bayonet connector, Digital I/O with 3-way screw terminal.
Yes

Models:

+
-